Radium Fuel Hanger (Pumps Not Included) For Walbro Pump GSS342 or AEM 50-1200 Subaru Impreza 1993-2007 / WRX / STI 2002-2007
20-0340-00
The Radium Fuel Pump Hanger will fit a variety of Walbro Fuel Pumps for those of you who want to increase the fuel volume in the Subaru WRX / STI.
The Radium fuel pump hanger allows the use of 1 or 2 aftermarket high-flow fuel pumps. The machined assembly mounts in the factory fuel tank using the OEM gasket and hardware. The fuel level sender and temperature sensors are retained.
The pumps merge into a single port outlet with 8AN ORB threads. The crossover and return uses 6AN ORB threaded ports. To simplify plumbing, the kit includes OEM hose adapter fittings for all model years listed. Shown below is for mid model years which use a SAE quick disconnect fuel feed. There is also a return line SAE quick disconnect fitting included for newer models. Lastly, -6AN male fittings are included for those that use aftermarket feed and return hoses.
The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low profile design keeps all wiring tucked nicely underneath the OEM cover plate. Nonconductive acorn nuts are provided to prevent any accidental short circuits.
Furthermore, the high quality in-tank wiring is insulated with chemically resistant ETFE. Stainless steel crimp-on ring terminals and heat shrink are provided for external wiring connections.
The kit includes a venturi jet pump with a new integrated pressure relief valve that is optimized for high flow pump(s). The kit also includes a streamlined anodized aluminum collector box.
Unlike the 2004-2007 WRX STi OEM variation, the Radium Engineering collector box has been optimized to work in ALL gas tanks. Shown below is the smallest OEM gas tank baffle found in the model list above. It improves the fuel supply around the pump(s) inlet. There is a 1-way fill valve incorporated on the front side of the tank that flows 355LPH. It serves as a trap door keeping the pump(s) supplied with fuel during aggressive driving. Furthermore, all returning fuel from the pressure regulator return and the crossover hose enter the collector box keeping it full. The OEM fuel level and fuel temperature sensors secure to the mounting bracket.
Single pump applications can reuse the OEM fuel pump controller, but it is recommended to upgrade the wiring as high flow fuel pumps draw additional current requiring larger gauge wire.
- Designed to allow the use of 1 or 2 aftermarket high-flow fuel pumps
- The machined assembly mounts in the factory fuel tank using the OEM gasket and hardware
- The pumps merge into a single port outlet with 8AN ORB threads, and the crossover and return use 6AN ORB threaded ports
- Includes OEM hose adapter fittings where applicable, and there is also a return line SAE quick disconnect fitting included for newer models
- -6AN male fittings are included for those that use aftermarket feed and return hoses.
- Designed with custom stainless electrical studs that easily handle the high current demand that compact bulkhead connectors lack
- The serviceable connectors are properly sealed and are impervious to all standard and exotic fuels
- The low-profile design keeps all wiring tucked nicely underneath the OEM cover plate
- Nonconductive acorn nuts are provided to prevent any accidental short circuits
- High-quality in-tank wiring is insulated with chemically resistant ETFE
- Stainless steel crimp-on ring terminals and heat shrink are provided for external wiring connectors
- Includes a venturi jet pump with a new integrated pressure relief valve that is optimized fir high-flow pumps
- Includes a streamlined anodized aluminum collector box
- The collector box has been optimized to work in all gas tanks
- Improves the fuel supply around the pump's inlet
- There is a 1-way fill valve incorporated on the front side of the tank that flows 355 LPH and serves as a trap door keeping the pumps supplied with fuel during aggressive driving conditions
- There will be enough components included to use 1 or 2 fuel pumps. Depending on the setup, some parts will simply not be used. A pliable fuel pump filter sock must be used for proper fitment.
- Note: This kit eliminates the OEM hanger's "post" fuel pump filter. A low micron aftermarket fuel filter should be installed downstream to protect the injectors from debris.
Features:
- Anodized Aluminum Laser Etched Plate
- Anodized Aluminum Collector Box and Check Valve
- Anodized Aluminum Venturi Jet Pump
- Anodized Aluminum Fittings for All Model Years
- Anodized Aluminum Dual Pump Mounts
- ETFE Wire with Stainless Steel Terminals
- Submersible Rubber Fuel Hose
- Stainless Steel Hardware and Clamps
This system is compatible with the following fuel pumps (NOT INCLUDED):
- Walbro F90000267
- Walbro F90000274
- Walbro F90000285
VEHICLE COMPATIBILITY
- 93-07 Subaru Impreza (including WRX & STi)
- 97-08 Subaru Forester (All)
- 89-99 Subaru Legacy (All)
- 94-99 Subaru Outback (All)
- 05-06 Saab 9-2X
*NOT COMPATIBLE WITH JDM WRX STi SPEC C
Review pages below for additional information:
