Mishimoto Front-Mount Intercooler Kit Subaru STI 2015-2021

Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto 2015+ Subaru STI Front-Mount Intercooler Kit will provide your 2015+ Subaru STI with the ability to make the most horsepower and torque possible. This 2015+ Subaru STI intercooler kit was designed with the same 28" intercooler as our 2015+ Subaru STI front-mount intercooler kit. The massive 3.5" thick core will support up to 600 whp or 30 psi of boost pressure! Smooth cast end tanks make for uninterrupted airflow through the cooler. This results in an intercooler that provides the best airflow and cooling capabilities without excessive pressure drops. Your fully built rally car will have no problem keeping a dense, cold, intake charge with this highly engineered 2015+ Subaru STI intercooler kit.

The Mishimoto 2015+ Subaru STI front-mount intercooler kit features mandrel-bent aluminum piping for optimum airflow. The 2015+ Subaru STI front-mount intercooler pipe routing maintains your factory fog lights, so you can see on those dark, foggy rally stages. Everything you need is included in the 2015+ Subaru STI front-mount intercooler kit to make for a worry-free installation. No cutting of the front bumper or other modifications are required with the application-specific crash bar that positions the intercooler perfectly in the lower grille of the front bumper where it will receive optimal airflow.

The 2015+ Subaru STI intercooler kit includes two different turbo outlet hoses, just in case you have an upgraded turbo with a larger compressor outlet. And who doesn’t want an upgraded turbo? Did I hear a blow-off valve on your car? The 2015+ Subaru STI front-mount kit has that covered too. The piping works with the stock bypass valve or aftermarket blow-off valves! This 2015+ Subaru STI intercooler is backed by the Mishimoto Lifetime Warranty to ensure superior craftsmanship!

Features:

• Direct fit for the 2015+ Subaru STI
• 3.5" thick intercooler design optimized for maximum flow and rated to 600 whp
• No modification to front bumper and retains stock fog lights
• Includes black powder-coated steel, tubular crash bar
• Optimal core design for maximum cooling efficiency with minimal pressure drop
• Includes two different turbo outlet hoses for stock or aftermarket turbos
• Works with stock bypass valve or aftermarket blow-off valve
• Cooler available in Sleek Silver, or Stealth Black

Includes:

• (1) Bar-and-Plate Intercooler
• (1) Steel Crash Bar w/ Mounting Hardware
• (2) Hot Side Intercooler Pipes
• (2) Cold Side Intercooler Pipes
• (1) BPV Flange Adapter
• (1) Turbo to Hot Pipe Coupler (for stock turbo)
• (1) Turbo to Hot Pipe Coupler (for aftermarket turbo)
• (1) 2.25" – 2.5" Silicone Transition Hose
• (1) 2.5" – 2.75" Transition Coupler
• (1) 2.75" Straight Coupler
• (2) 2.5" – 2.75" Intercooler to Pipe Hoses
• (1) BPV Recirculation Hose
• (2) 1.5" T-Bolt Clamps
• (1) 2.00" T-Bolt Clamp
• (2) 2.5" T-Bolt Clamps
• (4) 2.75" T-Bolt Clamps
• (5) 3" T-Bolt Clamps
• (1) Bypass Valve Gasket
• (2) 6" of Thermal Wrap
• (1) Sound Symposer Plug

Note: Filter re-oil is not included with the lifetime warranty Mishimoto recommends that this intercooler kit, with or without the optional air intake, is not used with the stock ECU programming. It is highly recommended that the customer is able to retune the vehicle’s ECU after installing the intercooler kit. Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle. This kit is rated for approximately 600 whp, or 30 psi of turbo boost. Exceeding these horsepower or pressure limits may require a custom-sized front-mount intercooler .THIS FRONT-MOUNT INTERCOOLER KIT WILL NOT FIT WITH THE MISHIMOTO 2015+ STI OIL COOLER KIT